Lab ultrapure water purification system HK-5801N20
- Introduction
+ HK-5801N20 Lab ultrapure water purification system is used to produce the ultrapure water,
+ With the method of combing the double reverse osmosis filter and ion exchange.
+ The equipment was manufactured according to the national experimental water specification and test method, combined with self-advantage and used the abroad advance technology for reference.
+ It can be widely used in the microbial media water, analysis regent, Pharmaceutical setting, instrument analysis, biochemical reagent and life science area.
- Principle
+ The principle of instrument as follows: pretreating the tap water by precision and activated carbon filter, remove the particle, like silt, adsorb strange odor,
+ Make the tape water clean, then desalt water by reverse osmosis device, access the water in and save it in the storage tank,
+ Till here the water can reach the national third level water, at the same time drain the waste water away.
+ Then go through the third level water from purification column and deep desalted to get the first level water, then go through the Uv sterilization, microfiltration or super filtration, remove the bacteria, particle and hot source
- Character
+ Simple water operation interface, high measurement accuracy; two level water can be produced to meet the different requirement;
+ LCD display, touch screen, Online real-time of water quality and temp;
+ Chinese and English display; level permission function to make sure the safety operation.
- Specifications
+ Environment requirement: (10～45)℃, relative humidity: ≤90%RH, no vibration and no power around the instrument.
+ Water source: Tap water TDS＜500ppm, temp (5～45)℃, pressure: （0.1～0.4 ) MPa （water source＞500ppm, suggested to be equipped with outer softener.)
+ Water capacity（25℃) : 20L/h
+ RO system recycle: ＞30%
+ RO treat level: double reverse osmosis
+ RO water characteristic : RO water TDS (total dissolved solids, ppm) ≤ source water TDS*5% (salt rejection≥95%) , （when source water＜300ppm, RO water conductivity＜5μS/cm)
+ UP water characteristic :
+ Electrical resistivity: 18.2MΩ.cm（25℃)
+ Heavy metal ion: ＜0.1ppb
+ Total organic carbon （TOC): ＜10ppb
+ Particle size (0.22um): ＜1ml
+ Water outlet: 2（RO reverse osmosis water, UP ultrapure water)
+ Quantitative water : yes
+ Consumable replacement reminder : yes
+ UV sterilization lamps : yes
+ Water quality monitor : Online conductivity monitor+ online electrical resistivity monitor
+ dimension: 630mm×556mm×611mm（length×width×height)
+ Power: AC（170～264) V, (50～60)HZ
+ Consumption: 350W
- Standard package : host + accessory bag
